H3.1-1000w wind generators

Model: H3.1-1000w

1.Blade is designed according to airfoil structure and made of glass fiber reinforced plastic .

2.Yaw shaft is made of reinforced aluminum, light and strong.

3.Generator is extreme light and small,low in noise,running in high efficiency.

4.Inverter is three-in-one type,integrating rectifier,controller and inverter.

5.Control system has the function of charging,discharging and unloading.

6.LED indicates kinds of information simultaneously.

Because H3.1-1000w wind generators is small,light,high output and easy maintenance,It can be well used in housing.In addition,it also can be used in:

--Telecommunications Station

--TV Transfer Station

--Monitoring Station (military, hydrology, observatory)

--Water-pumping Station and may other places

1000w wind generators

The main technical data of H3.18-1000w wind turbine generators system is :

Rated power(W)	1000
Maximum output powerW	2000
Charging voltage(V)	DC 60
Blade quantity	3
Rotor blade material	GRP
Rotor blade diameterm	3.1
Start-up wind speed (m/s)	3.0
Rated wind speed (m/s)	9.0
Rated rotating rate (r/min)	500
Wind energy utilizing ratio (Cp)	0.45
Generator output	Single-phase frequency conversion AC
Output AC frequency (Hz)	0~400
Rated charging current (A)	15
The maximum charging current (in a short time )(A)	30
Generator efficiency	>0.8
Tower diameter(mm)	8920003.5 (4pcs)
Tower height(m)	8
Weight of generator (kg)	15
Battery 12V 150Ah/ 200Ah	5pcs