H3.1-1000w wind power generators

The Model H3.1-1000w wind power generators has the great advantages of high efficiency and low rated wind speed. It introduces several patented technologies and uses some special materials.The off-grid controller adopts the integrated design which consists of the controlling, inverting and load-diverting parts.

It fulfills the functions of charging and protection for over charging/discharging, over-loading and short circuit, also supplies a diversion load. The controller outputs sine wave and has a spare interface for solar energy. Without especial fixation, the controller for 1000W could be connected to the solar panel within 400W.

The on-grid controller can connect wind power generators to electrical grid. The Yaw Shaft has the equipment of electric slip ring inside which can ensure the free running of generator without cable twisting. Due to the modularization-design, Model H3.1-1000w wind power generators is free for maintenance and easy for installation.

It can be installed only by the manual work, without welding, concrete or cranes. Even a tyro can handle it easily and swiftly. Any more information, Welcome to our website.

Rated power(W)	1000
Maximum output powerW	2000
Charging voltage(V)	DC 60V
Blade quantity	3
Rotor blade material	GRP
Rotor blade diameterm	3.1
Start-up wind speed (m/s)	3.0
Rated wind speed (m/s)	9.0
Rated rotating rate (r/min)	500
Wind energy utilizing ratio (Cp)	0.45
Generator output	single-phase frequency conversion AC
output AC frequency (Hz)	0~400
Rated charging current (A)	15
The maximum charging current (in a short time )(A)	30
Generator efficiency	>0.8
Tower diameter(mm)	89X3.5×2000
Tower height(m)	8
Weight of generator (kg)	15
Battery 12V 150Ah/ 200Ah	5pcs

Hot Wind Turbines Products